AyrMesh Hub2n

$374.95

The AyrMesh Hub2n is a WiFi booster that out-blasts typical WiFi access points with 40 times the wireless power.

Description

Simplified WiFi coverage for your whole property
The AyrMesh Hub is the building block of the AyrMesh system. Weatherproof and easy to mount, the AyrMesh Hub system allows for superior WiFi and network coverage across your property. The first Hub, the Gateway, is connected to your Internet connection (any make of router), and additional Hubs just require power and good “line-of-sight.” Hubs can be up to 2.5 miles apart and you can “hop” up to three times in every direction, for a total coverage area over 15 miles across.

Additional information

Weight 2 lbs
Dimensions 10 x 8 x 4 in
Q: What does the AyrMesh Hub2n do?
— Asked on October 17, 2016
A: The Ayrstone AyrMesh Hub2n is the building block of your AyrMesh Network. Mounted at a high elevation outside, each compact, rugged AyrMesh Hub can cast its powerful signal to a laptop or other WiFi device up to half a mile away. Additional AyrMesh Hubs, requiring only an electrical connection, can extend your network even further. With clear line-of-sight, AyrMesh hubs can be placed up to 2.5 miles apart, although we recommend putting them 1 mile apart to maintain continuous coverage.
Q: What do I need to get started?
— Asked on October 17, 2016
A: Most people start with a single AyrMesh Hub or with an AyrMesh Hub and an AyrMesh Receiver (to bring the network into a building). From there you can add more AyrMesh Hubs to extend your network further, more Receivers for additional buildings or to add non-WiFi devices, AyrMesh IndoorAPs to provide WiFi inside your buildings, and AyrMesh Switches to connect additional Ethernet devices to the network. Remember that, with Ayrstone's 90-day money-back guarantee, there is no penalty for trying Ayrstone products.
Q: What is the difference between the AyrMesh Gateway Hub and the AyrMesh Remote Hub?
— Asked on October 18, 2016
A: There is no actual difference – the Hubs configure themselves according to the role in which they find themselves. If they can “see” the Internet on their Ethernet ports, they configure themselves as Gateways; if not, they configure themselves as Remotes. You can switch the physical Hubs between Remote and Gateway locations and they’ll just reboot themselves to their new role.
— http://Administrator
Q: How does the AyrMesh Receiver work?
— Asked on October 18, 2016
A: The AyrMesh Receiver combines a powerful WiFi radio with an 8dB directional antenna. The user simply mounts the AyrMesh Receiver where it is in range of and pointed at the AyrMesh Hub. The AyrMesh Receiver’s power supply is plugged into the wall, and an Ethernet device can be plugged into the AyrMesh Receiver’s LAN port.
— http://Administrator
Q: Can the AyrMesh Receiver be used without an AyrMesh Hub?
— Asked on October 18, 2016

This question has not been responded to yet.

Q: What’s the difference between the Cab Hub and the normal Hub2n?
— Asked on October 18, 2016
A: The difference is that the Cab Hub is a normal Hub that also comes with our specialized power cord and magnetic antenna. These allow the Cab Hub to be mounted in a tractor, sprayer, combine, or truck cab.
— http://Administrator
Q: What is the purpose of the AyrMesh Bridge?
— Asked on October 18, 2016
A: The Bridge was originally developed for AyrMesh users who wanted to put their Gateway Hubs in a more advantageous position than on top of the house (e.g. on top of a grain leg or on a building on a nearby hill). However, it can be used as a “wireless Ethernet cable” to provide network connectivity anywhere.
— http://Administrator
Q: How does the Bridge work?
— Asked on October 18, 2016
A: The bridge simply transmits data from each of the Bridge radios to the other. One Bridge radio is connected to your network – it may be your router, a Remote Hub, a Receiver, or even the end of another Bridge – and the other is connected to a device you want connected to your network – a computer, IP camera, etc. The radios transmit a signal in the 5 GHz. band. The radio signal they use, however, is a special narrow-band signal that is invisible to 5 GHz. WiFi. It can interfere with (and be interfered with) by 5 GHz. WiFi signals, but it is invisible to normal WiFi adapters and equipment.
— http://Administrator
Q: What’s the difference between the Bridge, the Hub, and the Receiver?
— Asked on October 18, 2016
A: The Bridge works just like two Hubs or a Hub and Receiver, except the Bridge does not provide a WiFi signal for laptops, tablets, smartphones, etc. to connect to, and the Bridge can cover more distance than the WiFi devices. Hubs can be up to 2.5 miles apart, the Receiver can be up to 2 miles from the Hub, and the Bridge radios can be as much as 5 miles apart.
— http://Administrator
Q: What is the purpose of the AyrMesh IndoorAP?
— Asked on October 18, 2016
A: The IndoorAP was created primarily for folks with outbuildings (especially metal outbuildings) that the outdoor WiFi will not penetrate adequately. It is designed to simply and quickly provide indoor WiFi to any location served by the AyrMesh network. It snaps on to the power supply of an AyrMesh Hub2n, Receiver, or Bridge radio. Note that its WiFi SSID will be different from the Hub’s.
— http://Administrator
Q: What is the purpose of the AyrMesh Switch?
— Asked on October 18, 2016
A: The switch is just a way to turn one Ethernet port into 7 – an “outlet strip” for Ethernet ports. It allows you to add more Ethernet ports wherever you need them in your network – it can be attached to your router, a Remote Hub, Receiver, Remote Bridge radio, or IndoorAP.
— http://Administrator
Q: Does the Switch check in to AyrMesh.com?
— Asked on October 18, 2016
A: No, it’s just a local device.
— http://Administrator

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • Hub Antenna Power v1_800

    AyrMesh Cab Hub

    $499.95
    Add to cart